Views: 0 Author: Site Editor Publish Time: 2022-04-20 Origin: Site
profiles pipe are made of sanitary polyvinyl chloride resin as the main raw material, added with appropriate stabilizers, lubricants, fillers, colorants, etc., are extruded by a plastic extruder and injection molded by an injection molding machine. Next, let us understand the specification and size information of profiles pipe. Here are some answers.
Here is the content list:
l Its specification information.
l Its size information.
In daily life, soft profiles pipe are usually used, which have good toughness and ductility. Common sizes are 25mm, 30mm. profiles pipe are widely used as water pipes, which can be used in household environments, commercial places, and industrial fields. The water delivery pipe is a hard pipe profile, which has good strength, strong aging resistance, and long service life. The nominal diameter of the water supply pipe is larger than that of the threading pipe but not as large as the drain pipe. Usually, there are 25mm, 50mm, 90mm, 110mm, etc. Smaller ones are used in the home environment, and the largest amount of water is sent in the industrial environment. As a drainage pipe, profiles pipe have the highest performance requirements, not only having a good surface hardness, meeting safety factors, and high tensile strength and aging resistance requirements. To meet the requirements of industrial discharge, the profile sewer pipe must have a certain degree of acid and alkali resistance. The nominal diameter of the drain pipe is the largest among all profiles pipe. In the home environment, generally use less than 160mm. The main drainage pipes and industrial sites can choose sizes of 200mm, 315mm, 500mm, etc.
The size of profiles pipe should be distinguished according to their type, and the nominal outer diameter size of different types of profiles pipe is different. The maximum nominal diameter of soft profiles pipe is 50mm, which generally does not exceed this size. The nominal diameter of hard profiles pipe can reach the size of 50cm. The size of the soft profiles pipe is implemented by the GB/T13527.1-1992 standard, and the size of the hard profiles pipe is implemented by the GB/T13020-1991 standard. Commonly used profiles pipe sizes are 2.5mm, 3mm, 4mm, 5mm, 6mm, etc. The larger sizes range from 400mm to 1000mm. There are different pressure levels for profiles pipe. Commonly used ones are: 0.3Mpa, 0.6Mpa, 1.6Mpa, etc. The regular products are marked with this value on the pipe wall.
Our official website is www.krahpipe.net. If you are in a related profession, or are interested in our profiles pipe products, or want to know more about downpipe profiles, profiles pipes, and other product information, please do not hesitate to contact us. We have a professional production team, and all of our products meet national and international standards. At the same time, we also have a professional and competent team of after-sales service engineers who are responsible for ensuring the normal use of products.