What are the characteristics of a spiral wound pipe machine plastic extruder?

The characteristics of a spiral wound pipe machine plastic extruder have many aspects. Here are the four characteristics of the spiral wound pipe machine plastic extruder and the maintenance method of the spiral wound pipe machine plastic extruder.

Here is the content list:

l Modularity and specialization

l Efficient and multifunctional

l Large-scale and sophisticated

l Intelligent and networked

l Maintenance

Modularity and specialization

The modular production of spiral wound pipe machine plastic extruders can adapt to the special requirements of different users, shorten the development cycle of new products, and strive for a larger market share; while the specialized production of spiral wound pipe machine plastic extruder can be extruded. The equipped spiral wound pipe machine's various system module components are arranged for fixed-point production and even global procurement, which is very beneficial to ensure the quality of the spiral wound pipe machine plastic extruder throughout the period, reduce costs, and accelerate capital turnover.

Efficient and multifunctional

The high efficiency of spiral wound pipe machine plastic extruder is mainly reflected in high output, low energy consumption, and low manufacturing cost. In terms of function, the spiral wound pipe machine screw plastic extruder has been used not only for the extrusion molding and mixing processing of polymer materials, but the spiral wound pipe machine screw plastic extruder has expanded its use to food, building materials, packaging, and pulp. , Ceramics and other fields.

Large-scale and sophisticated

Realizing the large-scale spiral wound pipe machine plastic extruder can reduce the production cost, which has advantages in the large spiral wound pipe machine twin-screw plastic pelletizing unit, spiral wound pipe machine blown film unit, spiral wound pipe machine pipe extrusion unit, etc. More obvious. The major spiral wound pipe machine technology and equipment required by the national key construction services, and the large spiral wound pipe machine extrusion pelletizing unit, one of the three key equipment supporting large-scale ethylene projects, has long relied on imports. Therefore, it is necessary to speed up the spiral wound pipe machine plastic extrusion The iterative process of emerging technology meets the needs of petrochemical industry development.

Intelligent and networked

The spiral wound pipe machine plastic extruder has generally adopted modern electronic and computer control technology. The spiral wound pipe machine plastic extruder process parameters such as melt pressure and temperature, various parameters of the entire spiral wound pipe machine extrusion process The temperature of the section fuselage, the speed of the main screw, and the feed screw of the spiral wound pipe machine, the ratio of various raw materials, the current and voltage of the motor and other parameters are detected online, and the closed-loop control of the microcomputer is adopted. This is extremely beneficial to ensure the stability of the process conditions of the spiral wound pipe machine plastic extruder and improve the accuracy of the product.

Maintenance

⒈The spiral wound pipe machine plastic extruder equipment should be placed in a ventilated position to ensure that the spiral wound pipe machine plastic extruder motor emits working heat and extend its life; the spiral wound pipe machine plastic extruder machine should be well-grounded.

⒉Regularly check the screw of the spiral wound pipe machine plastic extruder. After using the new spiral wound pipe machine plastic extruder for 1 hour, use the tool to tighten the screw of the moving knife and the fixed knife to strengthen the spiral wound pipe machine plastic extruder blade Fixation with the tool holder; lubricating oil should be added to the bearings of the spiral wound pipe machine plastic extruder regularly to ensure the lubricity between the bearings; to ensure the sharpness of the cutting tool of the spiral wound pipe machine plastic extruder, it should be regular Check the cutter to ensure its sharpness and reduce unnecessary damage to other parts caused by the blunt blade of the spiral wound pipe machine plastic extruder; regularly check whether the belt of the spiral wound pipe machine plastic extruder is loose and tighten it in time.

⒊Restart the spiral wound pipe machine plastic extruder——Before the second start, the remaining scraps in the machine room should be removed to reduce the starting resistance of the spiral wound pipe machine plastic extruder. The spiral wound pipe machine plastic extruder should be opened regularly The inertia cover and pulley cover of the machine.

⒋Replace spiral wound pipe machine plastic extruder parts-when changing the cutter, the gap between the movable knife and the fixed knife: 0.8MM for spiral wound pipe machine crushers above 20HP is better, and 0.5MM for crushers below 20HP. The thinner the recycled material, the larger the gap can be.

The above are the four characteristics of the plastic extruder of the winding pipe machine, and the maintenance method of the plastic extruder of the winding pipe machine. If you have any questions, please contact Eagle Machinery Co., Ltd. We are very enthusiastic to answer your questions.