Spiral wound pipe machine screw structure and barrel structure

The spiral wound HDPE pipe machine is suitable for glass products, hardware tools, electronics, electrical appliances, papermaking, ceramics, chemicals, food, beverages, building materials, and other industries. Pallet packaging is suitable for spiral wound pipe machines, such as bulk container transportation and bulk pallet packaging can improve logistics efficiency and reduce losses during transportation. It has the advantages of dust-proof, moisture-proof, and low packaging cost. Next, let's take a look at the screw structure and barrel structure of the spiral wound pipe machine. Here are some answers.

Here is the content list:

l Screw structure of spiral wound pipe machine.

l Spiral wound pipe machine barrel structure.

Screw structure of spiral wound pipe machine.

Screw structure is the main factor affecting the productivity of spiral wound pipe machines. If there is no reasonable screw structure, simply increasing the screw speed to increase the extrusion volume will violate the objective laws and will not succeed. The design of high-speed and high-efficiency screw is based on high speed. The plasticizing effect of this kind of screw at low speed will be worse, but the plasticizing effect is gradually improved after the screw speed is increased, and the best effect is obtained when the design speed is reached. At this time, there is not only a higher production capacity but also a qualified plasticizing effect.

Spiral wound pipe machine barrel structure.

The improvement of the spiral wound pipe machine barrel structure is mainly to improve the temperature control of the feed section and set the feed trough. The entire length of this independent feed section is a water jacket, and the temperature of the water jacket is controlled by an advanced electronic control device. Whether the temperature of the water jacket is reasonable is very important for the stable work and efficient extrusion of the spiral wound pipe machine. The temperature of the water jacket is too high, the raw material will soften prematurely, and even the surface of the raw material particles will melt, which weakens the friction between the raw material and the inner wall of the barrel, thereby reducing the extrusion thrust and extrusion volume. However, the temperature should not be too low. A barrel with a too low temperature will cause excessive resistance to the rotation of the screw. When the load capacity of the motor is exceeded, it will cause difficulty in starting the motor or unstable rotation speed. The use of advanced sensors and control technology to monitor and control the spiral wound plastic pipe machine water jacket automatically controls the temperature of the water jacket within the best process parameters.

If you are interested in our spiral wound pipe machine products or have any questions about spiral wound pipe machines, please feel free to contact us. Our official website is https://www.krahpipe.net/. Our cost-effective products will bring you a better experience. Our company adheres to the corporate culture of "quality-oriented, customer first", and has always made unremitting efforts to become a professional supplier of HDPE spiral tanks in the industry.