DN4000 HDPE Spiral Pipe Production Line

      The big advantage of this HDPE spiral pipe production line is that production is very flexible. One HDPE spiral pipe production line can produce the pipe from DN300 to DN4500 and changing time is very short with variety of wall structure. The pipe length can be from 1 meter to 9 meters according to requirement with any international standards.

     The main applications for the HDPE spiral pipe products are low, non -pressure applications like for sewer, drainage, storm water, sea outfall/intake, irrigation systems and or even chemical storage tanks. The software of PIPEFINDER can help to produce the pipes, fittings, and manholes according to standard and project requirements.

Main Feature of HDPE Spiral Pipe Production Line

· HDPE spiral pipe diameters: DN/ID 300 mm up to DN/ID 4500 mm

· HDPE spiral pipe length: 6 to 9 meters, with integrated socket and spigot

. Pipe ring stiffness: SN1 to SN32 or above, according to ISO9969

· Output: 700-1400kg/h (HDPE, PP-HM, PP-B, PP-H)

· HDPE spiral pipe Application: Drainage Pipe systems, Sewage pipe systems, Industrial pipes, Relining, Outfall pipes, chemical storage tank, marine structured wall pipe, manhole, etc.

 HDPE spiral pipe wall structure(PR, OP, CPR, SQ, VW, SP)

PR	OP	CPR
PR profile achieve high stiffness with low weight. This is the   most common profile for sewer and water drainage applications.	OP profile can achieve greater stiffness with a comparatively low   weight for sewer and drainage application.	One more Water way layer on top of CPR profile, can achieve higher   stiffness and lower weight for sewer and drainage application.