|
|
Krah Pipes
Home » Products » Pipe machine » Krah Pipes

loading

Share to:
sharethis sharing button

Krah Pipes

Krah pipe is the best solution for large diameter pipe. The diameter is from DN300 to DN4000mm. The Krah pipe is made from HDPE or PP.
Availability:
Quantity:

Krah Pipes

   Krah pipes systems with various stiffness classes which are designed for utility and industrial applications. It is made from High Density Polyethylene (HDPE) or PP to manufacture these pipes. The diameter of Krah Profiled pipe is from DN/ID300mm to DN/ID 4000mm. The ring stiffness is SN2, SN4, SN8, SN16 or according to customer requirements.


ADVANTAGES of HDPE or PP Krah Pipe

· Pipe Weight

The extremely low weight of Krah profiled pipe allows a simpler and faster installation of the pipes, as in most cases no heavy machinery is necessary for the installation and handling of the HDPE or PP Krah profile wall pipes. Most of the handling can be done by an excavator on-site.

· Enviromental and long life time

 Low investment costs and a service life over 100 years reduce the operating costs.

· Jointing

Krah pipes do not require large butt welding machines as they are joined either by rubber ring joint or electro-fusion.

krah pipe, krah machine, helical extrusion, profilline pipe,profileen pipe, profilline machine

krah pipe, krah machine, helical extrusion, profilline pipe,profileen pipe


· Installation

The installation time is faster than other materials as the standard Krah pipes lengths are between 5.5 to 6 meters long. Fewer lifts mean unloading and loading the pipes into position saves even more time.


  Krah pipe, HDPE spiral pipe machine,krah pipe, krah pipe machine, helical extrusion, profilline pipe,profileen pipe, profilline machine,structured wall non-pressure pipes


· Transportation

As it is possible to nest these Krah pipe, transportation costs can be reduced.


· Chemical and Corrosion Resistance

Krah Profiled pipe and fittings are made of the same material and jointed to one homogenous piece. Not even connections between the pieces pose a weak spot in the piping as they are joined by a rubber ring or electro-fusion water tight joint.


· Homogenous Piping

Krah profiled pipe and fittings are made of the same material and jointed to one homogenous piece. Not even connections between the pieces pose a weak spot in the piping as they are joined by a rubber ring or electro-fusion water tight joint.


· Effective Roughness

krah pipe, krah machine, helical extrusion, profilline pipe,profileen pipe, profilline machine,profileen pipe

Due to its low roughness as shown in the above graph there is almost no accumulation on the pipe bottom and Krah profiled pipe have the ability to self purify. Low roughness has an important economic advantage as maintenance expenditure is kept to a minimum. Due to the low roughness the hydraulic properties are improved and smaller diameters are required compared to conventional pipe materials with the same flow rate. Krah pipe convey flows up to 17% greater than concrete pipes, and up to 60%better than corrugated steel pipes.


· Abrasion Resistant

krah pipe, krah machine, helical extrusion, profilline pipe,profileen pipe, profilline machine,profileen pipe,storm water pipe, marine structed wall pipe

Krah pipes are among the most abrasion resistant pipes. This has been tested in the Darmstadt procedure and the results are shown in the diagram above and support the quality of polyethylene and polypropylene pipes.


· UV-Resistant

Commonly most natural materials and other plastics are degraded by weathering effects, particularly by the combined impact of short-wave ultraviolet radiation in sunlight and atmospheric oxygen. Black polyethylene sprial pipes are permanently resistant to atmospheric corrosion and UV radiation, as the polyethylene used contains carbon black which acts as both a pigment and an ultra violet stabiliser. Thus the Krah pipes can be used and stored outside without the Krah pipe material being damaged.


· Resistant to Micro Organisms

Polyethylene or Polyproplene is not nutrient media for bacteria, fungi and spores, so that the material is resistant to all forms of microbial attack as well as both sulphurous acid and sulphates.


Previous: 
Next: 

PRODUCTS LISTS

QUICK LINKS

CONTACT US

Add : No.12, Shuangtun Lu, Madian, Jiaozhou, Qingdao, China
Tel :+86-532-82268513 /+86-532-87290108
Whatsapp : +86-135 8323 2887
Fax : +86-532-82268603
Skype: zhoumaozhen@hotmail.com
E-mail : machinery@eaglegroup.cn
LEAVE A MESSAGE
Copyright © 2023 Eagle, All Rights Reserved. Site Map